Quick Start Guide 11
3.2. Windows 7 Setup
If you have a Windows 7 operating system, your firewall may block UDP
traffic and consequently RST may not discover your readers. Perform the
following to configure your system:
For Microsoft Firewall
1 Log into your computer as Administrator.
2
Navigate to the Control Panel and select
Control Panel ń System and Security
.
3
Select
Allow a program through Windows firewall
.
4
Scroll down the list and locate
Startup Tool
, check it, and press
OK
.
5
If Startup Tool is not in the list, press
Allow another program
.
6
Locate
Startup Tool
, check it, and press
OK
.
7
Restart RST and it should discover readers.
For Third-Party Firewalls
1 Log into your computer as Administrator.
2
Set your firewall to allow RST to receive UDP traffic on port 50000 and
50001.
To Next Page
Loading...