Quick Start Guide 1
1 Reader Overview
1.1.
Reader Hardware
The 3M Toll RFID Reader 6204 is a multi-protocol, multi-regional Radio
Frequency Identification (RFID) System that operates in the 860 – 960 MHz
UHF band. The reader is configured at the factory to operate within a
specific regulatory region (for example: FCC Part 90).
Figure 1
3M Toll RFID Reader 6204 UHF Reader
As shown in the following figure, the 6204 supports four Tx/Rx antennas
(not shown). The reader is also equipped with RS-232 serial and Ethernet
interfaces.
Figure 2
3M Toll RFID Reader 6204 Power and I/O Connections
To Next Page
Loading...