Quick Start Guide 19
5.2. Deployed Reader Operation with RCT
Once your readers are deployed, you can access them directly using the
embedded Reader Configuration Tool (RCT). To access a particular reader,
perform the following:
1
Enter the reader’s IP address into your web browser, press the
button on the RST tool bar or select
Configure
from the
Tools
pull-down menu.
2
The reader’s RCT interface is displayed.
3
Log into the reader. Press
Login
for the login screen.
4
The default login is
guest
. If you need administrator privileges, login as
admin
and enter
readeradmin
as the password.
5
Press
Submit
.
6
Select
Basic Configuration ńSetup Antenna/Cables
to configure the
antennas, gain, and power settings.
To Next Page
Loading...