Quick Start Guide
3 The Reader Test Tool (RTT) is displayed.
4
Login to the reader. From the pull-down menu select
ReaderĺLogin…
.
5
For administrator login, select
admin
. The initial password (
Pwd
) is
readeradmin. See Advanced Setup section to change the password.
6
Verify the Operating Mode is set to
Active
. From the pull-down menu
select
Operating ModeĺActive
.
7
Select the
Tag Performance
tab and press
Start
.
8
Place tags in front of antenna and verify tags are read and displayed.
To Next Page
Loading...