3M 6204 - Page 20

1 2 3
4
5 6 7
Reader Configuration
16
3
M Toll RFID Reader 6204
Quick Start Guide
9
Estimate the number of tags that will be presented to the reader at any
one time and press
Next> .
1
0 It is highly recommended that you save the reader setup as a profile.
Select
Save changes to a profile… , enter a Profile Name , and press
Finish to complete the initial reader setup.
Saving Reader Setup
Reader setup
information should be
saved as a profile. In
the event that you
need to reboot or
power down a reader,
the reader setup can
be quickly reloaded
by loading the profile.
If you don’t save the
reader setup, you can
loose the information
if the reader is
rebooted.