The 3M
TM
Particulate Respirators
8214 and 8514, N95 are designed
for applications such as welding,
soldering and other operations
involving metal fumes including
those with ozone
1
and nuisance
levels of organic vapors.
2
These
products’ many features help
provide workers comfortable,
durable respiratory protection.
NIOSH approved N95
• At least 95% filtration efficiency
against solid and liquid aerosols that
do not contain oil.
3
TC-84A-0454
3M
TM
Cool Flow
TM
Exhalation Valve
• Patented one-way valve offers easy
exhalation for cooler dry comfort
.
Carbon Filter Material
• Provides 3M recommended ozone
protection (up to 10 x PEL).
1
• Provides relief from odors caused
by nuisance level organic vapor
associated with some welding
operations.
2
Cake-resistant filter media
• Uniquely-designed filter layers
reduce the caking of particles
on the respirator surface.
• Helps make the respirator
breathe easier longer, which
contributes to comfort, longer
service life and increased savings.
Faceseal (8214 only)
•
Contours easily to help
provide a good seal.
• Comfortable to wear.
Adjustable noseclip
• Helps provide a custom fit
and secure seal.
• Reduces the potential for
eyewear fogging.
Fully adjustable straps
• A single tug helps provide a
comfortable, secure fit.
3M
TM
Welding Web
• The fiber media and protective
layers of this respirator are
flame resistant as demonstrated
per ASTM D2859-96. Not a
substitute for a faceshield.
Particulate Respirators
8214 and 8514, N95
3042
page 1 of 2
3
3M
TM
Particulate Respirator 8514, N95
(Inset photo: 3M
TM
Particulate Respirator 8214, N95)
Issue Date 01/01/04
8214
Faceseal
• Grinding
• Sanding
• Sweeping
• Bagging
• Other dusty/hot
operations
• Welding
• Brazing
• Soldering
• Torch cutting
• Metal pouring
• Foundry
operations
• Lab settings
• Petrochemical
operations
• Undercoating
Suggested Applications
1. 3M recommended for ozone protection up to
10 times the OSHA PEL, or applicable exposure
limits, whichever is lower. (Not NIOSH approved
for ozone.)
2. 3M recommended for relief against nuisance levels
of organic vapors. Nuisance level organic vapor
refers to concentrations not exceeding the OSHA PEL,
or applicable exposure limits, whichever is lower.
3. Tested against particles approximately 0.3 micron
in size (mass median aerodynamic diameter) per
42 CFR 84.
These respirators help reduce exposure to certain
particles. Misuse may result in sickness or death.
Before use, the wearer must read and understand
User Instructions provided as a part of product
packaging. Time use limitations may apply.
For
proper use, see package instructions, supervisor
or call 3M
OH&ESD Technical Service in U.S.A.,
1-800-243-4630. In Canada, call 1-800-267-4414.
WARNING
!
To Next Page
Need help?
General
