Need help?Do you have a question about the 3M 8832-JG1 UPC SM and is the answer not in the manual?
General| Brand | 3M |
|---|---|
| Model | 8832-JG1 UPC SM |
| Category | Cables and connectors |
| Language | English |
Safety glasses should be worn when handling chemicals and cleaving the optical fiber.
Follow company health, safety, and environmental instructions for isopropyl alcohol use.
Cleaved glass fibers are sharp; use tweezers and dispose of them properly.
Optical fiber can be damaged by excessive forces; consult specifications for proper handling.
Take precautions against invisible laser light; never look directly into the fiber or connector.
3M™ No Polish Connectors 8832-JG1 & 6832-JG1 terminate 1.6mm and 2.0mm jacket cable.
Lists components found in the connector box and other required tools.
Includes placing the boot, removing cable jacket, and preparing aramid yarn.
Clamps the cable and ensures the fiber is seated correctly in the guide slit.
Details removing buffer coating and cleaving the fiber using appropriate tools.
Verifies cleave length, strip length, and releases the fiber buffer.
Guides through attaching the boot, sliding connector nest, and actuation lever.
Involves securing aramid yarn, tightening the boot, and trimming excess yarn.
Explains how to join two connectors to form a duplex connector.
Ensures that the latches on the connectors are properly fitted together.
Outlines the steps to insert tools into the dust cap and remove the boot and fiber.
To Next Page
