This respirator helps protect against certain particles. Misuse can result in sickness or death.
For correct use, consult supervisor and these
User Instructions
, or call 3M in China, 86-21-
22105335. In U.S.A., call 1-800-247-3941. In Canada, call Technical Service at 1-800-267-4414.
In Mexico, call 01-800-712-0646.
IMPORTANT
Before use, the wearer must read and understand these User Instructions. Keep these
instructions for reference.
Use For
Particles such as those from grinding, sanding, sweeping, sawing, bagging or processing
minerals, coal, iron ore, metal, flour, wood, pollen and certain other substances. Liquid or non-
oil based particles from sprays that do not also emit oil aerosols or vapors. Follow all applicable
local regulations. For additional information on 3M use recommendations for this class of
respirator please consult the 3M Respirator Selection Guide found on the Personal Safety web
site at www.3M.com/respiratorselector or call 1-800-243-4630 in U.S.A. In Canada, call 1-800
267-4414. In China, consult the 3M web site at www.3M.com.cn/PPE or call 86-21-22105335.
Do Not Use For
Do not use for gases and vapors, oil aerosols, or sandblasting, unless nozzle and blast are
physically separated from the operator in an exhaust-ventilated enclosure; particulate
concentrations that exceed either 10 times the occupational exposure limit or applicable
government regulations, whichever is lower.* In the United States, do not use when the U.S.
Occupational Safety and Health Administration (OSHA) substance specific standards, such as
those for arsenic, asbestos, cadmium, lead in the construction industry, or 4,4’-methylene
dianiline (MDA), specify other types of respiratory protection. This respirator does not supply
oxygen.
*For Use in China: Do not use for oil based particles. Do not use for particles in concentrations that exceed
the maximum allowable concentration required by the applicable regulation and standard. The maximum
allowable concentration is obtained by multiplying the Assigned Protection Factor (APF) provided by
GB/T 18664 “Selection, Use and Maintenance of Respiratory Protective Equipment” and the permissible
Occupational Exposure Limit (OEL) of the contaminant.