To Next PageTo Next Page
Need help?Do you have a question about the 3M 9820 and is the answer not in the manual?
General| Brand | 3M |
|---|---|
| Model | 9820 |
| Category | Respiratory Product |
| Language | English |
This respirator protects against certain particles. Misuse may result in sickness or death.
Wearer must read and understand these User Instructions before use.
Effective against particles from grinding, sanding, sweeping, sawing, bagging, minerals, coal, flour, metal, wood, pollen.
Do not use for gases, vapors, oil aerosols, sandblasting, or concentrations exceeding limits.
Helps reduce exposure to biological particles but cannot eliminate risk of infection.
A written respiratory protection program must be implemented meeting OSHA 29 CFR 1910.134 requirements.
Leave the contaminated area immediately and contact supervisor if dizziness, irritation, or distress occurs.
Store the respirator away from contaminated areas when not in use.
Inspect respirator before each use for signs of damage, including headbands and noseclip.
Conduct a user seal check before each use. Do not use if a proper seal cannot be achieved.
Dispose of used product in accordance with applicable regulations.
Individuals with compromised respiratory systems should consult a physician and complete a medical evaluation.
Do not use in atmospheres containing less than 19.5% oxygen.
Do not use when particulate concentrations exceed 10 times the permissible exposure limit or regulations.
Do not alter, abuse or misuse this respirator.
Do not use with beards or facial hair that prevent a good seal.
Respirators protect lungs against airborne contaminants, not skin exposure.
Designed for occupational/professional use by adults trained in its use and limitations.
Store in original packaging away from dust, sunlight, extreme temperatures, moisture, and chemicals.
Storage temperature range is -20°C (-4°F) to +30°C (+86°F).
Maximum relative humidity for storage should not exceed 80% RH.
Replace respirator if damaged, soiled, or breathing becomes difficult.
Step-by-step guide to properly position and seal the respirator on the face.
Perform a user seal check by covering the respirator and inhaling/exhaling sharply.
Instructions on how to properly remove the respirator without disturbing the seal.
At least 95% filtration efficiency against solid and liquid aerosols that do not contain oil.
Lists approved TC- and respirator model configurations.
N95 filter effective against particulate aerosols free of oil; time use restrictions may apply.
Details on usage restrictions, concentration limits, modification prohibitions, and user responsibilities.
