Model C1060 Special Instructions for System Manager
3M 2001 February
The C1060 system is capable of operating on any one of eight different
channels. You can correct these types of interference by changing the base
station operating channel. To do this:
1. With the base station turned on, press and release the Channel Select switch
once. (This advances the system to the next channel.) One of the red
indicators (1–8) will light, indicating the newly selected channel. See
Figure 15.
Figure 15.
2. Pull outward on the right side of the base station half–cover and then lift and
remove the cover. See Figure 16.
Half Cover
Figure 16.
To Next Page
Loading...
