EasyManua.ls Logo

3M C1060 - Battery and Battery Charger Troubleshooting

3M C1060
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting Model C1060
3M 2001 February
26
Battery and Battery Charger Troubleshooting
Problem Possible Cause Solution
1. No lights come on when a
battery is inserted into charger.
1. Dirty contacts on battery or
charger.
1. Clean contacts on battery and
charger with an alcohol
moistened swab.
2. No power to charger.
2. Make sure power transformer is
plugged into charger and a
liveoutlet.
3. Defective battery. 3. Try a known good battery.
4. Defective charger. 4. Call for authorized service.
2. Short battery life. 1. Worn out batteries. 1. Replace battery.
2. Wrong type of power
transformer used for charger.
2. Make sure power transformer is
marked Secondary Voltage 14
VAC.
3. The green light on the charger
never comes on.
1. Defective battery. 1. Replace the battery.

Table of Contents

Other manuals for 3M C1060

Related product manuals