3M C1060 - Adjusting the Monitor Speaker Volume

Special Instructions for System Manager Model C1060
 3M 2001 February
22
Day/Night
Switch
Monitor
Volume
Access
Figure 19.
Normally, the VOLUME DAY/NIGHT switch is always left in the DAY
position.
However, if local ordinances require quieter nighttime operation of the menu
sign, move the VOLUME DAY/NIGHT switch to the NIGHT position.
If the system has an optional monitor speaker, adjust its volume using the
following procedure:
1. With the base station turned ON, insert a small straight–blade screwdriver
into the MONITOR VOLUME access hole. See Figure 19.
2. Turn the volume control clockwise to increase the volume or
counterclockwise to decrease it.
Adjusting the
Monitor Speaker
Volume