Model C1060 System Description
3M 2001 February
The programming station is used to program C960 and C1060 headsets to the
same channel as the base station. Infrared light is used to transfer program data
to the C1060 headset and a separate jack is provided for the C960 headset
programming cable. See Figure 3.
Figure 3. Programming Station
The battery charger charges headset batteries in approximately 1.5 to 2 hours.
The charger is available in 3–slot and 6–slot versions. See Figure 4.
Figure 4. 3–Slot and 6–Slot Battery Chargers
To Next Page
Loading...
