3M DX70i - Page 162

162 3M™DX70iデジタルプロジェクタ製品安全ガイド © 2008 3M
日本語
5. Use a screwdriver to remove
the 3 screws from the lamp
module.
6. Pull out the lamp module.
To replace the lamp module, reverse the previous steps.
Warning: To reduce the risk of personal injury, do not drop the lamp mod-
ule or touch the lamp bulb. The bulb may shatter and cause injury if it is
dropped.
ランプカートリッジの交 換