3M DX70i - Page 81

© 2008 3M Proiettore digitale DX70i 3M
™
- Guida alla sicurezza del prodotto 81
ITALIANO
Sostituire la cartuccia della lampada
The projector keeps track of the lamp usage. It will show you a warning
message:
When you see this message, change the lamp as soon as possible. Make sure
the projector has cooled down for at least 30 minutes before changing the
lamp.
Warning: Lamp compartment is hot! Allow 30 minutes to cool down before
changing lamp!
1. Turn off the power by pressing the Power/Standby button.
2. Allow the projector to cool down for at least 30 minutes.
3. Disconnect the power cord.
4. Push up and remove the cover.
Sostituzione della cartuccia della lampada