POTS>Ringers>Operation
3. During the measurement an
hour glass will be visible at
the bottom of the display.
When the measurement
is complete, the Ring-
Ground, Tip-Ring and Tip-
Ground capacitance will be
displayed.
To display the equivalent
ringer count, press
Display Capacitance
.
4. Press
Display Ringers
to
return to the previous view.
POTS>Level Trace
Use Level Trace to measure and display the AC impedance of
an inactive pair as a function of frequency. This test can be used
to analyze a pair for loading and bridge tap problems. This is
NOT a continuous test.
To Next Page
Loading...
