Auto Test>Active POTS>Operation
7. Central Office with a
combination milliwatt and
quiet line termination:
Press
Edit Number
and enter
a digit that is a valid first
digit for the central office.
This will break dialtone and
the measurement will be
taken as if it were a quite
line termination.
8. Central Office without a
combination milliwatt and
quiet line termination:
If you have entered
telephone numbers in the
Dial Loss function or the
Talk Set function, they will
be shown in the telephone
number section.
If you have not entered
any telephone numbers in
the Dial Loss function or
the Talk Set function you
can use
Edit Number
to
enter the telephone number
information with the blue
keys.
To Next Page
Loading...
