3M Dynatel 965AMS - Page 27

147
3M™ Dynatel™ Advanced Modular System 965AMS Measurement Functions
Auto Test>Active POTS>Operation
14. Press
Pass/Fail
to see
only the OK, Yield, or Fail
symbols.
Auto Test>Vacant POTS
Use Vacant POTS to perform an automatic sequence of tests
on Vacant POTS lines. When you use the 3M
™
Dynatel
™
1342
or 1343 Far End Device II, the tests include: DC Voltage, AC
Voltage, DC Resistance, Opens, % Capacitance Balance, Load
Coil, Voice Band Loss, Voice Band Noise, Power Influence,
Longitudinal Balance, Slope, Resistance Balance (loop) and
Resistance Balance (% diff).
Auto Test>Vacant POTS>Hook-Up
2%$
'2.
",+
2ING2ING
'ROUND'ROUND
4IP
4IP
Dynatel 965AMS-BT.indd 147 6/21/06 10:49:13 AM