3M Dynatel 965AMS - Page 29

149
3M™ Dynatel™ Advanced Modular System 965AMS Measurement Functions
Auto Test>Vacant POTS>Operation
3. Press
Select
to move to
the type of cable. Use the
up and down arrow keys to
select your type of cable.
4. Press
OK
to return to the
main Auto Test screen.
5. Using the FED II (far end
device) can provide more
information about your
circuit. Press
FED
to use
the far end device.
6. Press
Test Pair 1
to start the
test.
7. The screen will display
the results of the
measurements.
Dynatel 965AMS-BT.indd 149 6/21/06 10:49:14 AM