Auto Test>Expert Pair Test
Use the Expert Pair Test to detect, identify and locate the most
common pair faults without having to change test leads. In most
situations, the 3M Dynatel
™
Far End Device II 1342 or 1343 is
required to provide the most complete information.
Auto Test>Expert Pair Test>Features
Identification
with FED
Location
with FED
Identification
w/o FED
Location
w/o FED
Working Pair Yes NA Yes NA
Good Pair Yes Length Yes Length
T/R Reversal Yes No No No
Light T/R Short Yes NA Yes No
Solid T/R Short Yes Yes Yes Yes
Solid T-Ground Yes Yes Yes No
Solid R-Gound Yes Yes Yes No
High T-Ground Yes Yes Yes No
High R-Ground Yes Yes Yes No
T-Battery Cross Yes Yes Yes No
R-Battery Cross Yes Yes Yes No
T-Complete Open Yes Yes Yes Yes
R-Complete Open Yes Yes Yes Yes
T&R-Complete
Open
Yes Yes Yes Yes
T-Partial Open Yes Yes Yes Yes
R-Partial Open Yes Yes Yes Yes
T&R Partial Open Yes Yes Yes Yes
To Next Page
Loading...
