3M File Belt Sander - Parts List

3M
1
/8 in. to
3
/4 in. File Belt Sander 3 Revision 022514
Parts List
ITEM 3M P/N DESCRIPTION QTY
1 30611 HOUSING - LEFT 1
2 30612 SOCKET BUTTON HEAD CAP SCREW - M4 x 25 mm 6
3 30613 MOTOR CASE 1
4 30614 O-RING - 31 mm ID x 1.5 mm WIDTH 1
5 30615 O-RING - 8 mm ID x 1 mm WIDTH 2
6 30616 HOUSING - RIGHT 1
7 30617 TRACKING / CONTROL KNOB 1
8 30618 SOCKET HEAD CAP SCREW - M3 x 4, STEEL 1
9 28368 *FILE BELT ARM STANDARD STYLE 1
10 30619 SPRING, TRACKING BIAS 1
11 30620 TRACKING ARM MOUNT 1
12 30621 SPRING - BELT TENSION 1
13 30622 TRACKING ARM POST 1
14 30623 HEX SOCKET COUNTERSUNK HEAD MACHINE SCREW - M4 x 10 1
15 30624 DUST COVER 1
16 30625 BELT COVER AND LATCH ASSEMBLY 1
17 28798 DRIVE STUD ADAPTOR 1
18 30627 BEARING - 2 SHIELDS 10 mm x 26 mm x 8 mm 1
19 30628 SHIM - 25.4 mm OD x 19 mm ID x 0.02 mm THK 1
20 30629 SHIM - 25.4 mm OD x 19 mm ID x 0.05 mm THK 1
21 30630 SPACER - 13.4 mm OD x 10.01 mm ID x 3.2 THK 1
22 30631 ENDPLATE ASSEMBLY - FRONT 1
23 30632 CYLINDER 1
24 30633 ROTOR 1
25 30634 ROTOR VANE 4
26 30635 ENDPLATE ASSEMBLY - REAR 1
27 30636 BEARING - 2 SHIELDS 6 mm x 19 mm x 6 mm 1
28 30637 BELT HOUSING 1
29 30638 DRIVE PULLEY 1
30 30639 FRONT EXHAUST MANIFOLD 1
31 30640 DIFFUSER 1
32 28799 MOTOR SPACER 1
33 30642 AIR GUIDE 1
34 30643 GASKET, AIR GUIDE 1
35 30644 HANDLE GRIP 1
36 30645 HANDLE 1
37 30646 RETAINING RING -
7
/16 in. DIAMETER 1
38 30647 VALVE STEM ASSEMBLY 1
39 30649 SAFETY LEVER ASSEMBLY SET 1
40 30650 SPRING PIN 1
41 30651 SPEED CONTROL 1
42 30652 O-RING - 9 mm x 1.5 mm 1
43 30653 VALVE SEAT 1
44 30654 VALVE 1
45 30655 VALVE SPRING 1
46 30656 RETAINING RING -
5
/8 in. DIAMETER 1
47 30657 DIFFUSER 1
48 30658 EXHAUST CAP WITH LABELS 1
49 30659 O-RING - 15.6 mm ID x 1.78 mm WIDTH 1
50 30660 WASHER, AIR INLET 1
51 30661 INLET ADAPTOR 1
52 30671 DRIVE PULLEY - RUBBER 1
53 30672 WRENCH - DRIVE WHEEL 1
54 30674 WRENCH - 2.5 mm L-KEY 1
55 30673 WRENCH - 4.0 mm L-KEY 1
56 28800 SEAL 1
57 55186 FRONT BEARING DUST SHIELD 1
58 A0016 SPACER - 18.0 mm OD x 12.1 mm ID x .02 THK 1
* See File Belt Contact Arm chart for additional arms