3M MP225 - Page 11

3M
™
Mobile Projector MP225
© 2012 3M. All Rights Reserved.
11
English
Power Adapter
The power adapter is used to charge the battery or power the projector. There are
four outlet adapters to give you the flexibility to power the 3M MP225 projector in
most countries.
Installing an Outlet Adapter onto the Power Adapter
1 Select the outlet adapter that will plug into your wall outlet.
2 Align the outlet adapter to the power adapter and slide the outlet adapter into
place.
Replacing the Outlet Adapter
1 Push the button on the outlet adapter.
2 Slide the outlet adapter up.
3 Remove the outlet adapter.
4 Replace with the new outlet adapter.