3M MP225 User Manual

3M
™
Mobile Projector MP225
12 © 2012 3M. All Rights Reserved.
English
Charge the Battery
The rechargeable battery gives you up to two hours of battery life. When the battery
needs to be charged, the status indicator will flash red. The battery should be fully
charged before using the projector.
Charge the battery by connecting the power adapter to the projector.
1 Turn the projector power off.
2 Connect the power adapter to the projector’s DC input.
3 Connect the other end of the power adapter into the electrical outlet.
4 The status indicator will change to amber while the battery is charging.
5 Allow three hours to fully charge the battery. When charging is complete, the
status indicator will turn off.
110–240 VAC
50/60 Hz
Note: The battery status will not appear when the power adapter is connected
to the projector. The power adapter icon will appear instead.

3M MP225 Specifications

General

Projection distance	- m
Projection technology	-
Screen size compatibility	10 - 80 \
Projector native resolution	SVGA (800x600)
Focal length range	- mm
Light source type	LED
Service life of light source	20.000 h
Full HD	No
Supported graphics resolutions	832 x 624, 1280 x 960, 1024 x 768 (XGA), 1280 x 768 (WXGA), 1440 x 900 (WXGA+), 640 x 480 (VGA), 800 x 600 (SVGA)
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Internal storage capacity	2 GB
Noise level	- dB
Product type	Portable projector
Product color	White
Market positioning	Portable
Power source	Battery
Battery life (max)	2 h
Power consumption (standby)	- W

Weight and Dimensions

Depth	12 mm
Width	26 mm
Height	59 mm
Weight	300 g