3M MPRO150 User Manual

3M
™
Pocket Projector MPro150
12 © 2010 3M. All Rights Reserved.
English
Power Adapter
The power adapter is used to charge the battery or power the projector. There are four outlet
adapters to give you the flexibility to power the 3M MPro150 in most countries.
You can also power the projector with the 3M MPro150 car charger, available separately.
Installing an Outlet Adapter onto the Power Adapter
1 Select the outlet adapter that will plug into your wall outlet.
2 Align the outlet adapter to the power adapter. Turn the outlet adapter in the direction of
the “LOCK” arrow to lock it in place.
Replacing the Outlet Adapter
1 Push the button on the outlet adapter.
2 Turn the outlet adapter in the direction of the “OPEN” arrow.
3 Remove outlet adapter.
4 Replace with the new outlet adapter.

3M MPRO150 Specifications

General

Brand	3M
Model	MPRO150
Category	Projector
Language	English