3M
™
Pocket Projector MPro150
© 2010 3M. All Rights Reserved.
47
English
Cleaning the Projector
1 Turn off the projector and disconnect power and other cables.
2 Use a soft cloth, such as the 3M
™
High Performance Cleaning Cloth, to wipe off dust.
If the dust is difficult to remove, dampen the cloth with clean water and then wipe the
projector clean. Then use a clean cloth to dry the projector.
Important Note: Do not use cleaning chemicals or solvents to clean the projector.
Cleaning chemicals and solvents may cause the plastic parts to discolor.
To Next Page
Loading...
Need help?
General
