3M
™
Pocket Projector MPro150
© 2010 3M. All Rights Reserved.
21
English
Video Mode Icons
The projector will display a video icon when it is connected to a video cable or a video source. If
no cables or devices are detected, the home screen (see “Home Screen” on page 28) will display.
Icon Description/ Meaning
The projector detects the audio/video cable.
NTSC
The projector detects an NTSC video input signal.
PAL
The projector detects a PAL video input signal.
The projector detects the component audio/video cable.
RGB 480i 60Hz
The projector detects the video input signal and displays the video
source’s resolution and refresh rate below the component icon.
The projector detects the VGA-audio cable.
800x600 60Hz
The projector detects computer input signal and displays the input
resolution and refresh rate
The projector does not support the video signal.
The projector is measuring and synchronizing to video input signal.
To Next Page
Loading...
Need help?
General
