3M
™
Pocket Projector MPro150
© 2010 3M. All Rights Reserved.
5
English
m Warning
To reduce the risk associated with hazardous voltage:
• Do not modify this product in any way. Use only 3M-approved replacement components.
• Do not attempt to service this projector other than battery replacement. There are
no user-serviceable parts other than the battery. Service to be performed only by a
3M-authorized service provider using 3M-approved system components.
• Do not use the wall power supply in a wet environment.
• Do not use with a damaged wall power supply. Replace damaged part prior to use.
To reduce the risk associated with fire and explosion:
• Do not immerse the projector or battery in any liquid or allow either to get wet.
• Use only 3M-approved power supply and lithium ion polymer battery provided.
• Do not disassemble or short circuit the battery.
• Do not dispose of the battery by incineration or fire.
• Do not operate this projector in any environment above 30°C (86°F).
• Do not expose the projector or battery to direct sunlight in a closed space such as
a vehicle.
• Do not carry the battery in pockets, purses or handbags where it may contact
metal objects.
• Do not place battery in contact with metal objects.
• Do not expose or store battery in direct sunlight or excessive heat (>60°C [140°F]), or in
moist or caustic environments.
To reduce the risks associated with driver distraction:
• Do not use this projector in a moving motor vehicle.
To reduce the risks associated with choking:
• Keep microSD card, AV adapters and other small parts away from young children.
To Next Page
Loading...
Need help?
General
