range of up to approximately 3 km outdoors. Low power setting gives a range of up to
approximately 1 km.
The highest power setting gives a
2
PELTOR Lite-Com Pro II
Programmable wireless communication headset with surround sound listening feature.
The Peltor Lite-Com Pro II offers reliable, efcient wireless communication between two or more individuals,
even in noisy environments.
The product is intrinsically safe and approved for use in potentially explosive environments (I.S. approved.)
Read these instructions carefully before use and save for future reference.
FUNCTIONAL PROPERTIES
•
• Programmable CTCSS & DCS tone signaling, allowing multiple users to use the same channel without interferring with each other.
• Operating time up to approximately 17 hours, depending on mode of use.
• Low battery alarm.
• Automatic shut-off.
• Chosen settings are veried with a voice message.
• The last setting is stored when the unit is switched off.
• Programmable
Customisation of the functions in this product should be made by an “Authorised Peltor Lite-Com Pro II Dealer”.
See www.peltorcomms.3m.com/dealer on the Internet!
KEY FEATURES (Fig. H)
1. Extra wide headband (MT7H7F4010-EU-50) with leather band padding for greater comfort throughout the working day.
Specially designed helmet attachments (MT7H7P3E4010-EU-50) with slots for attaching visor and rain shield.
2. Individually sprung stainless steel headband wires provide an even distribution of pressure around the ears.
Steel headband wires maintain their resilience better than plastic headbands through a wide range of temperatures.
3. Low prole two-point fasteners allow easy height adjustment.
4. Soft, wide foam/uid-lled ear cushions with built-in pressure-relief channels for low pressure,
and individual comfort.
5. Flexible antenna with low attachment and high receptivity.
6. External port for connecting external equipment, such as another communication radio, a mobile telephone etc.
7. Batteries. The Lite-Com Pro II is supplied with Peltor ACK08 Li-Ion battery and appropriate Power supply.
8. Noise cancelling speech microphone for high speech recognition.
9. Keypad for easy adjustment and setting.
FUNCTIONAL BUTTONS (Fig. A)
1. UP (+) Increases the level of the selected function.
2. ON/OFF/MODE (Θ) Switches the Lite-Com Pro II on and off, and allows you to choose between functions in the menu.
3. DOWN (–) Decreases the level of the selected function.
4. PTT Push To Talk function for the Lite-Com Pro II radio.
The user is responsible for obtaining any necessary licences for using the communication radio in the Lite-Com Pro II!
I M1 Ex ia I Ma
II 2G Ex ia IIC T4 Ga
II 2D Ex ia IIIC T125 C Da
The user is responsible for ensuring that the Lite-Com Pro II is used according to the applicable
regulations in explosive environments!
CE:PMR
FCC:462.5625MHz~467.7125MHz,
406.1 - 430,440 - 470MHz,LPD:433.05 - 434.79 MHz
To Next Page
Loading...
Need help?
General
