3M Pro-Comms - HARD hat Attachment

14 English
HARD HAT ATTACHMENT
PRO-PROTECT ELECTRONIC HEARING PROTECTION
1. Grab headband near the cable on the inside
and outside of the end cap. Lift up to pop off the
end cap from the mounting plate on the
headband. Repeat on the other side.
Please note – in order to attach 3M™ Pro-Protect
to a hard hat, you will need to use the hard hat
earmuff adapters, 3M™ PELTOR™ Hard Hat
Guide Arms Assembly, part number P3EG-PK.
2. Headband with end caps removed.
1 2