EasyManua.ls Logo

3M Protecta series - Description; Self Retracting Lifeline (SRL) Components View

3M Protecta series
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
WARNING: This product is part of a personal fall arrest, work positioning, or rescue system. The user must
follow the manufacturer’s instructions for each component of the system. These instructions must be provided
to the user of this equipment. The user must read and understand these instructions before using this
equipment. Manufacturer’s instructions must be followed for proper use and maintenance of this equipment.
Alterations or misuse of this product or failure to follow instructions may result in serious injury or death.
IMPORTANT: If you have questions on the use, care, or suitability of this equipment for your application,
contact 3M Fall Protection.
IMPORTANT: Before using this equipment, record the product identication information from the ID label in
the inspection and maintenance log of this manual.
DESCRIPTIONS:
Figure 2 illustrates key components of the base Rebel™ Self Retracting Lifeline (SRL). The Rebel SRLs are 6
ft. (1.8 m) lifelines, equipped with an in-line Load Indicator, which retract into a Thermoplastic Housing. Rebel
SRLs are available in multiple model congurations that allow attachment to an anchorage point, single or dual
mounting on a Full Body Harness, or similar equipment (see Figure 1). The Rebel SRL automatically locks at the
onset of a fall to arrest the fall, but pays out and retracts lifeline during normal movement by the attached user.
Figure 2 Rebel Self Retracting Lifeline (SRL) Components
B
D
F
G
A
C
E
A - Swivel B -Swivel Eye C - Carabiner (optional) D - Housing E - Web Lifeline F - Load Indicator G - Snap Hook

Related product manuals