English
9
247021E English
Ranger Blood and Fluid Warming Systems
method
1� Unplug the warming unit�
2� Unfold the cleaning tool� Wet the foam
pads with a nonabrasive solution, such as
Alconox
TM
brand detergent�
3� Insert the tool from the back of the unit
and pull the tool all the way out from the
front�
4� Rinse the tool with water and repeat 3 times� Discard the tool according to institutional protocol�
5� Wipe o the unit to remove excess uid�
to clean reSiStant, dried-on FluidS:
1� Spray a nonabrasive solution inside the slot of the warming unit and let sit for 15-20 minutes�
2� Clean the unit by using the cleaning tool�
NOTE: You may use a nonmetal instrument, such as a cotton swab, to clean the upper channels� If you
are unable to adequately clean the unit, call Arizant Healthcare Inc� Technical Service�
stoRage
Store all components in a cool, dry place when not in use�
seRviCing
ere are no user-serviceable parts in the Ranger warming unit� All service must be performed by
Arizant Healthcare Inc� or an authorized service technician�
Call Arizant Healthcare Inc. Technical Service at 800-733-7775 or 952-947-1200 for service
information.
Alconox is a trademark of Alconox, Inc�
To Next Page
Loading...
