3M Scotch Pro TL1306 - General Use and Maintenance; General Use Recommendations; Care and Maintenance Procedures

M
GENERAL USE
INSTRUCTIONS
1. Use 3 to 6 mil thick pouches. The
laminator is designed to work with
pouches that are a minimum of 3 mils
(1 mil = 0.001 inches) and a maximum
of 6 mils thick. Using pouches that are
thinner or thicker may cause jamming or
may affect lamination quality
(ex. bubbling).
2. If white blotches appear or the laminated
pouch appears hazy, send the item, sealed
end first, through the laminator again.
3. Items must be laminated on both sides.
One side lamination will cause the film to
be rolled up inside the machine, making
the laminating machine unusable.
4. DO NOT insert the open end of the pouch
into the machine to prevent it from being
rolled up into the machine.
5. DO NOT cut the pouch before laminating
to prevent it from being rolled up into the
machine.
CARE AND
MAINTENANCE
1. Wait for the laminator to cool down
and unplug it before cleaning. Wipe
the exterior with a cloth to remove
dust.
2. The roller heater is fragile. DO NOT
DROP machine or otherwise subject
it to impact.
3. Store laminator in a cool dry location.