EasyManua.ls Logo

3M Scott Safety ELSA 2000 User Manual

3M Scott Safety ELSA 2000
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1035070 N
08.2019
AS/NZS 1716 : 2012
Lic. BNP 540244 BSI
BENCHMARK
ELSA 2000
Question and Answer IconNeed help?

Do you have a question about the 3M Scott Safety ELSA 2000 and is the answer not in the manual?

3M Scott Safety ELSA 2000 Specifications

General IconGeneral
Brand3M
ModelScott Safety ELSA 2000
CategoryRespiratory Product
LanguageEnglish

Summary

PRE-OPERATIONAL WARNINGS

Read and Understand Manual

Emphasizes the importance of thoroughly reading and understanding the entire manual before use.

Prepare for Escape Situations

Provides guidance on preparing for emergency escape scenarios, including locating and using the apparatus.

Actions During Emergency

Outlines immediate actions to take when an emergency situation arises, focusing on calm and proper use.

Management and Checks

Details daily checks, usage restrictions, training requirements, and respiratory protection assurance for managers and personnel.

Legal Disclaimers and Copyright

Contains a disclaimer regarding failure to comply with instructions and copyright information for the manual.

PRODUCT MARKINGS, SYMBOLS AND APPROVALS

Important User Instructions

A crucial reminder to read all instructions thoroughly before operating the equipment.

Storage Conditions and Shelf Life

Information on optimal storage parameters including humidity, temperature, and shelf life.

EN 1146:2005 Standard Compliance

Details the European standard for self-contained open-circuit compressed air breathing apparatus for escape.

CE and AS/NZS Certifications

Covers CE European conformity and compliance with Australian/New Zealand standards for respiratory protective devices.

INTRODUCTION TO ELSA 2000

Breathable Air Quality Standards

Specifies the necessary standards for the air used in charging breathing apparatus.

Selecting Respiratory Protection

Lists key factors to consider when choosing appropriate respiratory protective equipment for escape scenarios.

Essential User Training

Underscores the mandatory requirement for accredited training by qualified instructors for proper operation.

Storage and Transportation Safety

Provides essential instructions for protecting the device during storage and transit to prevent damage.

Technical Description Overview

Presents a general technical description of the ELSA apparatus, its components, and operational specifications.

HOOD AND VALVE SYSTEM

Reducer/Cylinder Valve (RCV) Operation

Detailed explanation of the RCV's function, including its operation, warning whistle, and pressure relief mechanism.

Cylinder Contents Gauge Function

Describes the contents gauge, its indicators, and the conformity of the charging adaptor to relevant standards.

CYLINDER CONFIGURATIONS AND USE

Storage Bag Design and Features

Details the materials and features of the standard and alternative storage bags for the apparatus.

Donning and Activating the ELSA

Step-by-step instructions on donning and activating the ELSA apparatus correctly for emergency escape.

SCHEDULED MAINTENANCE AND CHECKS

Wearer Maintenance Responsibilities

Defines the different levels of maintenance tasks assigned to wearers, from simple checks to full preparation.

Neck Seal and Hood Handling

Important cautionary advice on preventing damage to the neck seal and proper hood donning procedures.

Air Flow Verification and Whistle

Instructions on checking air flow into the hood and understanding the warning whistle for low air supply.

ROUTINE CHECKS AND CLEANING

Post-Use Cleaning and Disinfection

Steps for cleaning and disinfecting the apparatus after it has been used, with specific product recommendations.

Cylinder Charging Safety Protocols

Critical safety warnings and operational requirements for personnel involved in charging cylinders with HP air.

CYLINDER MANAGEMENT AND CHARGING

Removing Cylinder from Bag

Steps to safely remove the cylinder from its storage bag, including checking for damage.

Cylinder Charging Procedure

Detailed instructions for charging the cylinder, including safety precautions and recommended flow rates.

Re-fitting Cylinder into Bag

Guidance on drying and correctly reassembling the cylinder into the bag after the charging process.

WORKSHOP REPAIR AND ANNUAL SERVICING

Conditions for Workshop Servicing

Outlines conditions that necessitate returning the apparatus for workshop servicing or annual checks.

Product Obsolescence Information

Information regarding product obsolescence, directing users to product marking and packaging for details.

Related product manuals