3M SD-200 Quick Start

LED Alert levels
QUICK START
IMPORTANT: For appropriate use of hearing protection devices, consult your company’s safety professional, applicable local
standards, or call 3M at 1-800-243-4630. (Note: Hearing protection sold separately.)
This screen displays L
EQ
/L
AVG
data and activates the LEDs at specic dB levels.
LED Alert Measurement Screen
Green LED: ashes when noise measurements are 80 - 85 dB
Yellow LED: ashes when noise measurements are 85- 105 dB
Red LED: ashes when noise measurements are above 105 dB
For more information, in United States, contact:
Website: www.3M.com/OccSafety
Technical Assistance: 1-800-243-4630
For other 3M products: 1-800-3M HELPS
Or 1-651-737-6501
©2011 3M Company
3M Occupational Health and Environmental Safety Division
3M Center Building 0235-02-W-70
St. Paul, MN 55144-1000
Printed in U.S.A.
34-8706-1605-8
Viewing Measurements
Pressing the mode key will cycle you through the measurement screens (as displayed below):
SPL L
EQ
/L
AVG
LED Alert
MAX MIN Run-Time

3M SD-200 Specifications

General

Brand	3M
Model	SD-200
Category	Measuring Instruments
Language	English