3M 110 Series - User Manual

1
110
CO - ppm

Single Gas Monitor 110 Series
User Instructions for 3M
™
Single Gas Monitor 110 Series, Carbon Monoxide (CO), Hydrogen Sulfide
(H
2
S), Oxygen (O
2
)
(Keep these User Instructions for reference)
Détecteur de gaz unique de série 110
Directives d’utilisation pour le détecteur de gaz unique 3M
™
de série 110,
monoxyde de carbone (CO) sulfure d’hydrogène (H
2
S), oxygène (O
2
)
(Conserver ces directives à titre de référence)
Monitor de un solo gas Serie 110
Instrucciones de uso para el Monitor de un solo gas 3M
™
Serie 110, Monóxido de Carbono (CO),
Ácido Sulfhídrico (H
2
S), Oxígeno (O
2
)
(Guarde estas Instrucciones de uso para referencia futura.)
Monitor de Gás Série 110
Instruções de Uso para o Monitor de Gás 3M
™
Série 110, Monóxido de Carbono (CO), Sulfeto de
Hidrogênio (H
2
S), Oxigênio (O
2
)
(Guarde estas Instruções de Uso para referência futura)
3

3M 110 Series Specifications

General

Category	Sound Level Meter
Measurement Range	30 dB to 130 dB
Weighting Networks	A and C
Display	LCD
Time Weighting	Fast and Slow
Type	Type 2 integrating sound level meter

Summary

General Safety Information

Intended Use

Defines the primary purpose and design of the 3M™ Single Gas Monitor 110 Series for continuous ambient air monitoring.

Warnings and Cautions

Lists critical safety warnings and precautions for the proper and safe use of the gas monitor to prevent harm.

Use Instructions and Limitations

Operational Scope

Specifies the gases the monitor is designed for and limitations, including usage in low oxygen environments.

General Device Description

Provides an overview of the 3M™ Single Gas Monitor 110 Series, its function, and design.

Specifications and Features

Operating Instructions and Alarms

Detector Activation and Display

Guides on how to turn on the detector and interpret the readings shown on the LCD display.

Normal Operation Modes

Details on how the monitor functions in normal mode for different gas models and displays.

Self-Test and Indicators

Explains how to perform a self-test and understand indicators like peak levels, time remaining, and end of life.

Alarm System Overview

Details on various alarms (low, high, over range, low battery) and how to view alarm set points.

Alarm Mode Table

A table summarizing alarm modes, display indications, and alarm sequences for different events.

Calibration and Verification

Instructions for performing calibration verification (bump test) and calibration procedures for specific models.

Maintenance and Disposal

Cleaning Procedures

Guidance on how to properly clean the external surfaces of the gas monitor.

Instrument Disposal

Instructions for safely disposing of the monitor after its operational life.

Products, Accessories, and Parts

Warranty Information

Contact Information