2
EXPLANATION OF PRODUCT SAFETY LABEL SYMBOLS
Attention: Read accompanying
documentation
High voltage.
Power must be
disconnected
before servicing.
Disconnect power before servicing. Unit
contains high voltage electrical circuits that
must be discharged and checked for voltage
prior to servicing. Service should be performed
only by 3M factory trained service personnel.
DANGER
Risk of electric shock
Display Unit: Mercury disposal
hazard
CAUTION
LASER LIGHT
DO NOT STARE INTO BEAM
0.95 mW at 630-670 nm
CLASS 2 LASER PRODUCT
Laser Scanner: Laser exposure
To Next Page
Loading...