16
If you discover any signs of wear and/or damage, remove the welding helmet from use and service or
replace as appropriate. Failure to do so may reduce the degree of protection provided and lead to serious bodily
injury or death.
REPLACEMENT PARTS AND ACCESSORIES
Replacement Parts
W WARNING
1. Failure to follow these instructions may reduce the capability of the 3M™ Speedglas™ Welding Helmet
G5-02 outside protection plate to withstand impact and penetration and may result in serious bodily injury
or death:
• Always wear secondary eye protection for a welding shield system that may be raised in the eld.
G5-02
08-0300-52
18-0099-68
02-0690-00
06-0700-83
08-0400-51
08-0400-52
07-0024-02
Printed Colors – Front:
Requester: Farrel Allen
Creator: deZinnia_26851
File Name: 26851-01_G5-02_ExpldView_Fig 14a_PSD.ai
Structure #: Illustration
Date: 02/18/20
This artwork has been created as requested by 3M. 3M is responsible for the artwork
AS APPROVED and assumes full responsibility for its correctness.
Scale:
1 Inch
08-0700-63
08-0500-56
08-0500-57
08-0500-58
08-0200-52
08-0200-50
08-0000-50iC
Printed Colors – Front:
Requester: Farrel Allen
Creator: deZinnia_26278
File Name: 26278-01_G5-02_ExpldView_Fig 14b_PSD.ai
Structure #: Illustration
Date: 10/21/19
This artwork has been created as requested by 3M. 3M is responsible for the artwork
AS APPROVED and assumes full responsibility for its correctness.
Scale:
1 Inch
Fig. 14a—Spare Welding Helmet Parts
Fig. 14b—Spare Welding Filter Parts
To Next Page
Loading...
