To Next PageTo Next Page
Need help?Do you have a question about the 3M Steri-Vac GS5 and is the answer not in the manual?
General| Power Requirements | 120V, 60Hz, 15A |
|---|---|
| Control System | Microprocessor-based control system |
| Sterilization Method | Ethylene Oxide (EO) Gas |
| Sterilant | Ethylene Oxide (EO) |
| Chamber Volume | 5.0 cubic feet |
| Operating Temperature | Typically 130°F (54°C) |
| Humidity Range | 80% RH |
Provides critical safety features and general safety instructions for the GS Series sterilizer.
Information on potential hazards of ethylene oxide and first aid procedures.
Highlights risks associated with fire, explosion, and electrical shock.
Specifies requirements for the installation environment, including location, size, ventilation, and air flow.
Illustrates components and connections for the GS Series sterilizer.
Step-by-step guide to initiating a sterilization cycle.
Procedure for selecting the desired temperature cycle (38°C or 55°C).
How to select the appropriate aeration time for the cycle.
Procedure for scanning the barcode on the 3M™™ Steri-Gas™™ EO Gas Cartridge.
Steps for inserting the EO gas cartridge and loading the chamber.
Final review of cycle parameters before initiating the sterilization process.
Instructions for safely unloading the sterilizer after a cycle.
Steps to follow after the cycle is successfully completed.
Procedures for daily cleaning and filter maintenance.
Scheduled maintenance to ensure proper function and performance.
Information on caution messages and how to handle them.
Details fault conditions that adversely affect cycle performance and their messages.
Provides descriptions and corrective actions for various error levels.
Information regarding preventive maintenance contracts and services.
