To Next PageTo Next PageWhat to do if 3M Attest 490M Attest BI is removed from well before incubation is complete?
If the 3M™ Attest™ BI has been removed before incubation is complete, replace it in the proper well within 10 seconds. This will prevent the loss of collected data.
General| Brand | 3M |
|---|---|
| Model | Attest 490M |
| Category | Laboratory Equipment |
| Language | English |
Disclaimers about illustrations, data, and hardware specifications being subject to change.
Describes device purpose, compatible BIs, and warranty details.
Outlines essential safety, precautions, and risk reduction strategies.
Explains the meaning of signal words (WARNING, CAUTION) and their consequences.
Lists safety (IEC/EN, UL, CE, RoHS, WEEE) and EMC (IEC 61326, CE EMC) standards the device complies with.
Explains FCC rules compliance (ICES-3/NMB-3) and potential interference.
Defines symbols found on the product and packaging like Manufacturer, EC REP, Date, REF, SN, Caution, CE, UL, RCM, RoHS II, DC, Recycle.
Details power supply specs (voltage, frequency, current) and environmental operating conditions.
Provides the physical dimensions (width, height, depth) of the Auto-reader unit.
Guides on choosing a location and connecting the power supply correctly.
Instructs on a 30-minute warm-up period and notes on keeping the unit powered on.
Describes the four incubation wells, touch button, and display indicators.
Identifies the USB cable port and power receptacle on the rear of the device.
Details the steps for activating and incubating biological indicators with safety precautions.
Guides on verifying BI crushing, media distribution, and correct placement in the well.
Instructs on recording the BI result and not removing it until the test is complete.
Guides on BI placement, handling removal, and the consequence of incorrect removal.
Explains how to use a non-processed BI as a daily positive control and its benefits.
Explains how to interpret positive (+) and negative (-) fluorescent results and their implications.
Describes optional visual pH color change interpretation for specific BIs (1491/1492V and 1295).
Details the audible alarm for positive results and BI removal, including silencing options.
Explains how to check the device's serial number, firmware version, and internal temperature status.
Describes how the Auto-reader handles and displays codes during power disruptions and recovery.
Introduces the optional PC connectivity for enhanced functionality and lists its capabilities.
States the device requires no user maintenance/calibration and provides cleaning instructions.
Provides a table of error/caution codes (C1, C2, C3, C6, E0, E1, E3, E4, E5, E8) and their solutions.
Addresses non-coded issues like alarm sounds, BI removal, display problems, and incorrect results.
Guides on PC requirements, downloading, installing, and registering the software.
Explains the elements of the Home page and how to navigate the application.
Details how to check for and install firmware updates for the Auto-reader via the Connect software.
Describes how to view, sort, and export historical BI data from the History page.
Explains how to document BI type, lot number, and control status on the BI Details page.
Details how to disable/enable alarms and synchronize the device's time with the PC.
Explains how to view device info (serial, temp) and create service files for troubleshooting.
Addresses issues with BI image mismatch, page display, minimized/closed application, and year 2000 time display.
Explains the error message related to outdated Connect software before firmware upgrades.
