24
Expected Life
Prior to rst use the product should be stored unopened in its original package in accordance with the
recommended storage conditions. Once the product is removed from its original packaging, the “in use”
or operational life will vary with frequency and conditions of use. Headgear subjected to more wear and
tear or use outdoors in direct sunlight may need to be replaced more frequently than headgear used
indoors. Inspect M-Series Headgear prior to each use as directed in the “Inspection and Maintenance”
section of these User Instructions. Any product showing signs of damage should be removed from
use and serviced or replaced as appropriate. See the “Listing of Components, Accessories, and
Replacement Parts” section of these User Instructions for more information on available spare parts. 3M
recommends a maximum life (shelf life plus in use life) of 5 years from the date of manufacture. Most
plastic components have a “molded in” date of manufacture and must be replaced as described above
regardless of outward appearance.
Store the Shaded Peel-off Cover (M-929) in original unopened packaging in accordance with the
recommended storage conditions listed in these User Instructions. Product may be used until “use by”
date specied on packaging.
LISTING OF COMPONENTS, ACCESSORIES, AND REPLACEMENT PARTS
Part # AAD
cat. #
Description
Headgear Assemblies
M-101 Respiratory Faceshield, without visor or faceseal
M-105 37314 Respiratory Faceshield Assembly: includes standard visor (M-925), standard
faceseal (M-935), size reducing comfort pad (M-956), and peel off (M-926)
M-107 Respiratory Faceshield Assembly: includes premium visor (M-927), ame resistant
faceseal (M-937), size reducing comfort pad (M-956), and peel off (M-928)
M-206 37299 Respiratory Faceshield Assembly: includes standard visor (M-925), comfort
faceseal (M-936), size reducing comfort pad (M-956), and peel off (M-926)
M-207 Respiratory Faceshield Assembly: includes premium visor (M-927), ame resistant
faceseal (M-937), size reducing comfort pad (M-956), and peel off (M-928)
M-301 Respiratory Hardhat, without visor or faceseal
M-305 Respiratory Hardhat Assembly: includes standard visor (M-925), standard
faceseal (M-935), size reducing comfort pad (M-956), and peel off (M-926)
M-307 Respiratory Hardhat Assembly: includes premium visor (M-927), ame resistant
faceseal (M-937), size reducing comfort pad (M-956), and peel off (M-928)
M-401 Respiratory Helmet, without visor or shrouds
M-405 Respiratory Helmet Assembly: includes standard visor (M-925), inner collar
(M-444), outer shroud (M-445), size reducing comfort pad (M-956), and peel
off (M-926)
M-407 Respiratory Helmet Assembly: includes premium visor (M-927), inner collar (M-
444), ame resistant outer shroud (M-447), size reducing comfort pad (M-956),
and peel off (M-928)
Replacement Parts
M-116 Replacement Airow Deector, for use with M-100 and M-200 Faceshields
M-150 37316 Replacement Head Suspension, for use with M-100 and M-200 Faceshields
M-154 Replacement Forehead Seal, for use with M-100 and M-200 Series Faceshields
M-316 Replacement Airow Deector, for use with M-300 and M-400
M-350 Replacement Head Suspension, for use with M-300 and M-400
M-354 Replacement Forehead Seal, for use with M-300 and M-400
To Next Page
Loading...
