3. Wireless Transfer Description
3.1 Output Method
USB Priority Output(*) Simultaneous Output
(USB, 2.4G& Bluetooth)
“USB Priority Output(*)” :
When using USB cable, data transfer wire USB cable only.
“Simultaneous Output”:
USB and 2.4G or Bluetooth output simultaneously. (Determined by communication mode).
If output is unsuccessful, will alarm.
3.2 Data Transfer Mode
Normal Mode(*) Inventory Mode
Automatic Storage Mode
“Normal Mode”:
Data will be uploaded immediately, if data cannot save successfully, scanner will alarm.
“Automatic Storage Mode”:
Data will be saved automatically when the distance is exceeded.
Scan the "Upload All Data" bar-code to upload the data when the data need to check.
“Inventory Mode”:
Data will be saved automatically.
Scan the "Upload Statistical Data" bar-code when the statistical data need to be viewed or uploaded.
*Remarks:
Scan the “Upload All Data” to upload the data, then scan the “Clear All Data ” to clear the data first, otherwise the bar
code read last time will be output again.
To Next Page
Loading...
