Need help?Do you have a question about the 3Svision N9071 and is the answer not in the manual?
General| IR Distance | Up to 30 m |
|---|---|
| Ingress Protection | IP66 |
| Power Supply | 12 VDC ± 25%/PoE (802.3af) |
| Sensor Type | CMOS |
| Resolution | 1920 × 1080 |
| Lens | 4mm, 6mm optional |
| Video Compression | H.264 |
| Night Vision | Yes |
| Weather Resistance | Yes (IP66) |
Details the key capabilities and specifications of the N9071 Mini Dome Network Camera, highlighting its high resolution and dual codec streaming.
Explains how to connect the N9071 Mini Dome Network Camera to a power source, detailing DC and PoE options.
Provides instructions for connecting the N9071 Mini Dome Network Camera to a network via a LAN cable and switch hub.
Details the step-by-step process for physically mounting the N9071 Mini Dome Network Camera, including screw hole installation.
Guides users on how to adjust the focus range of the N9071 Mini Dome Network Camera's lens for optimal image clarity.
Explains how to perform a factory reset on the N9071 Mini Dome Network Camera to restore default settings.
Guides users on how to access the N9071 Mini Dome Network Camera's interface using web browsers.
Describes the main interface of the N9071 Mini Dome Network Camera, including its various components and functionalities.
Details how to select the video format, supporting H.264 (Main/Sub Stream) and Motion JPEG.
Details how to start and stop recording video streams from the camera, including shortcut bar indicators.
Configures video settings including sensor mode, resolution, frame rate, and quality for H.264 and Motion JPEG streams.
Manages user accounts and privileges, allowing administrators to define access levels for viewing and control.
Configures network parameters, including IP assignment via DHCP or static IP, subnet mask, and gateway.
Covers the setup of event triggers, schedules, and responses for security monitoring and alerts.
Details how to configure motion detection areas and sensitivity levels to trigger alerts.
Provides instructions and precautions for upgrading the camera's firmware.
Explains how to reset all camera parameters to factory defaults, with options to retain or reset IP settings.
To Next Page