Chapter 9. Maintaining Units
162 3ware Serial ATA RAID Controller User Guide
The LED on the enclosure begins blinking.
3 When you are finished working with the drive and no longer need to see
the LED, return to this page and uncheck the
Identify box.
To blink the LEDs for all drives in a unit
1 Choose from the main menu in 3DM.
2 On the list of units, locate the unit you want to identify.
3 Check the box in the
Identify column.
The LEDs associated with each drive in the unit begin blinking on the
enclosure.
To Next Page
Loading...
