Need help?Do you have a question about the 3Ware 9500S-4LP and is the answer not in the manual?
General| Model | 9500S-4LP |
|---|---|
| Category | Controller |
| Interface | SATA |
| Ports | 4 |
| Max Drive Support | 4 |
| Form Factor | Low Profile |
| Bus Type | PCI Express |
| Cache Memory | Yes |
| Battery Backup | Optional |
| Cache Memory Type | DDR |
| Cache Memory Size | 64MB |
| RAID Levels | 0, 1, 5, 10 |
Explains terminology and formatting conventions used throughout the manual.
Details the features of the 3ware 9000 Series Serial ATA RAID controllers.
Highlights enhancements and changes from previous controller series.
Lists the necessary hardware and software to use the RAID controller.
Lists the items included in the product package for installation.
Discusses factors like cable length, slot selection, and airflow for installation.
Lists the tools and equipment required for the hardware installation process.
Outlines crucial safety precautions for personal and equipment protection.
Step-by-step instructions for installing the controller card.
Details installation for controllers with specific multi-lane connectors.
Covers final steps after hardware installation, including checks.
Instructions for migrating storage units from older controllers.
Explains fundamental RAID concepts and different RAID levels.
Guides users on selecting the appropriate RAID level based on needs.
Instructions on using the 3BM utility for configuration.
Step-by-step guide to defining RAID unit settings and parameters.
Explains the process and requirements for initializing RAID units.
How to ensure the system BIOS is set correctly for booting.
Final steps to load drivers and make configured units accessible to the OS.
Lists necessary items for driver installation in Windows.
Instructions for creating a bootable driver diskette for Windows.
Guide for installing Windows and drivers on a new system.
Steps for installing drivers on an existing Windows system.
Where to find and how to get Linux drivers for the controller.
Important advice on selecting the correct driver version for Linux.
How to check the installed Linux driver version.
Specific instructions for installing drivers on Red Hat Linux.
Specific instructions for installing drivers on SuSE Linux.
Information on acquiring FreeBSD drivers for the controller.
Lists the necessary items for installing FreeBSD drivers.
Guide for installing drivers during FreeBSD OS installation.
Steps for installing drivers on an existing FreeBSD system.
Instructions on how to compile drivers for FreeBSD.
Addresses issues related to fitting the controller into the chassis.
Solves boot problems when the controller is installed.
Addresses issues where the BIOS configuration utility is not accessible.
Troubleshoots issues with drives not being detected by the utility.
How to bypass the BIOS installation if not needed.
Lists tools needed for installing the BBU.
Provides a general overview of BBU attachment points.
Step-by-step guide for attaching the Battery Backup Unit to the controller.
Instructions on how to replace the battery in the BBU.
FCC statement regarding radio frequency interference.
Information about WHQL certification for drivers.
CE conformity statements for the product.
Details the warranty period and terms for the RAID controller and BBU.
Lists conditions not covered by the product warranty.
Information on how state laws affect warranty rights.
How to initiate warranty service and obtain replacements.
Information on accessing technical support resources.
Details on how to purchase additional products or information.
How to provide feedback on the user manual.
To Next Page
