EasyManua.ls Logo

3Ware 9500S-4LP - Materials Required; Creating a 3 ware Driver Diskette

3Ware 9500S-4LP
126 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Driver Installation Under Windows
54 3ware 9000 Series Serial ATA RAID Controller Installation Guide
Materials Required
3ware software CD-ROM
Microsoft Windows 2000, XP, or Server 2003 installation CD-
ROM. (Not required if Windows is already installed on another
drive.).
Floppy diskette, to create a driver diskette.
If you are installing Windows, you must create a 3ware driver
diskette. If Windows is already installed on another device, you
may install the 3ware driver from either the 3ware software
CD-ROM or from a diskette.
Creating a 3ware Driver Diskette
If you are installing Windows on a new unit or drive managed by
the 3ware RAID controller, you must create a 3ware driver diskette.
To create a driver diskette
1 Insert the 3ware software CD into your system.
2 When the 3ware Escalade Menu appears, click Driver and
Firmware Disks.

Table of Contents

Related product manuals