Driver Installation Under Linux
80 3ware 9000 Series Serial ATA RAID Controller Installation Guide
Driver Installation Under SuSE Linux
Materials required
3ware software CD-ROM
Floppy diskette, if you need to make a driver diskette.
SuSE Linux Installation CD-ROM/DVD (Not required if SuSE
Linux is already installed on another drive.)
Creating a SuSE Linux Driver Diskette
If you are installing Linux on the new drive or unit managed by the
3ware RAID controller, you must create a 3ware driver diskette. If
Linux is already installed on another device, you may install the
3ware driver from the 3ware software CD-ROM.
To create a driver diskette
1 Insert the 3ware software CD into your system.
2 When the 3ware Escalade Menu appears, click Driver and
Firmware Disks.
3 In the 3ware Driver and Firmware Disk Images menu, click the
button for the driver disk you want to create.
A confirmation window opens.
4 Insert a blank diskette into a drive and click the Yes button to
begin copying the driver to the floppy diskette.
To Next Page
Loading...
