Driver Installation Under Red Hat Linux
www.3ware.com 79
To build IA32E module
(this is used when creating a driver for the x86_64/EM64T
64-bit driver diskette), type:
make ia32e -f Makefile.rh
The file created is 3w-9xxx.i32
6 Copy the module as follows:
For 2.4 kernels, copy module to:
/lib/modules/<kernel string>/kernel/drivers/scsi/
3w-9xxx.o
7 If you installed a previous driver when you installed your
operating system, then perform this step to copy the driver into
the update directory, as well.
/lib/modules/<kernel string>/update/3w-9xxx.o
To Next Page
Loading...
