Appendix A. Installing the Battery Backup Unit
102 3ware 9000 Series Serial ATA RAID Controller Installation Guide
Installation Instructions
1 For full-height controllers, turn the controller memory-side
down on a flat surface.
2 Remove the screws that connect the PCI bracket to the
controller and set the bracket aside.
Figure 4. Removing the screws from the PCI bracket
3 For full-height controllers, turn the controller memory side up.
Half-height board:
bracket unscrews from
top side of board.
Full-height board: bracket
unscrews from bottom side of
board.
To Next Page
Loading...
