The 4ipnet EAP706 Wall Mount Access Point is
an on-the-wall as well as a desktop dual radio Wi-Fi
IEEE 802.11b/g/n + a/n/ac 2 X 2 MIMO access
point, designed to blend into a working or a living
environment practically and elegantly with its
simplistic yet sleek design.
The compact EAP706 in a small form factor lays
snug in a standard wall outlet box. Its side panel
features LED status indicators and two RJ45 ports.
It has the interfaces to serve both wireless and
wired LAN access. The RJ45 pass-through port
allows phone or IP-based devices to pass through
EAP706 without the need for additional outlets.
When coupled with the 4ipnet WHG series
Controller, the EAP706 supports Tunnel-based AP
Management, and comes with all standards
demanded by enterprise applications, including
business-grade security (802.1X, WPA and WPA2),
and multiple ESSIDs with VLAN tags to separate
the traffics of different departments. A centralized
WLAN management allows enterprises and
organizations to support a wide array of value
added applications, such as load balancing,
bandwidth control, and access control. The
patent-pending 4ipWES (Press-n-Connect)
technology bridges multiple EAP706s at the touch
of a button, which enables a quick and automatic
WDS Easy Setup by pressing the WES button on
EAP706. Extending wireless network coverage is a
breeze, be it across conference rooms or along
hallways.
EAP706’s high performance, security and optimal
invisibility make it a perfect choice of wireless
connectivity for your business.
2. Quick Installation Guide (QIG) x 1
3. Power Adapter (DC 12V) x 1 (Optional)
4. Mounting Screws x 2
5. Universal Mounting Panel x 1
6. Mounting Plate Lock Tool x 1
7. Detachable Antenna x 4
It is recommended to keep the original
packing material for possible future shipment
when repair or maintenance is required. Any
returned product should be packed in its
original packaging to prevent damage during
delivery.
To Next Page
Loading...
