70mai M200 - Button Functions; Voice Control

6
Button Functions
Press the power button a different number of times to perform different functions.
Dash cam status
Operation
Function
Turned off
Press once
Turn on the device
Turned on
Press once
Turn the Wi-Fi on/off
Press four times in a row
Format the memory card
Press five times in a row
Reset to factory settings
Press and hold for about
three seconds
Turn off the device
Press and hold for about
15 seconds
Force shutdown the device
Receiving the
connection request
Press once
Confirm the connection
authorization
Note: The dash cam can be turned on by pressing the power button only when it is
connected to an external power supply.
Voice Control
70mai M200 supports voice control. During the operation of the dash cam, the voice
commands from the user will trigger the relevant functions of the dash cam.
If the system language of the dash cam is set to Traditional Chinese, the Mandarin voice
commands are supported. If any other language is set, only the English voice commands
are supported.
Voice command
Function
“Take photo.”
Dash cam will take a photo and save it to the album.
“Lock the video.”
Dash cam will record an emergency video and store it in the
emergency video directory.
“Turn on audio.”
Dash cam will record audio as well as videos.
“Turn off audio.”
Dash cam will not record audio but only videos.
Note: When the dash cam is connected to the 70mai app, voice control is not supported.